FantasticSearch | E-commerce Search Demo

Scroll to: Top Results

E-commerce Search Demo

AI Assisted Filters

Positive filters:

Negative filters:

Category filter:

Parameters

Query:

Positive filters:

Negative filters:

Category filters: All

AI Assist: ON

Page: 1

Products

Time taken: 3 Max score: 1000.000 Total hits: 100 Full time: 0.0 s
Showing 1-10 of 100 products

B094F4MMF4 Price: $99.99 Score: 1000.000 Category: Electronics Rating: 4.1 Votes: 15 Find similar products Mini Bluetooth Vacuum Tube Preamp USB DAC Headphone Amplifier Receiver APTX-HD. Warm tips: 1. Bluetooth input is prior to USB input, if you want USB input please make sure Bluetooth input is disconnected. 2. USB input doesn't support U-disk or Hard-disk, can connect USB interface of computer or mobile phones (Android system needs OTG cable and IOS system needs camera kit, please prepare by yourself). 3. This is a preamp but NOT a amplifier or a phono preamp, CAN'T be used for turntables or passive speakers. The main purpose of L200 is to act as a buffer to sweet the sound. Parameters: Audio input: Bluetooth/USB/Stereo RCA Audio output: stereo L/R RCA / 3.5mm headphone jack Bluetooth version: 5.0 Bluetooth chip: QCC3034 (support SBC/AAC/APTX/APTX-LL/APTX-HD) USB input sampling rate: 16/24bit 44.1-48KHz USB input supported system: Win XP/7/8/10/MAC/Linux / phone OTG Matched headphone impedance: 16-300Ω Output power of headphone jack: 268mW@16Ω Treble & Bass range: ±10dB Frequency response: 20Hz~25KHz (±3dB) Distortion: 0.1% S/N Ratio: >98dB RCA out level: 2V Working voltage: DC 12V/above 2A (5.5mm/2.5mm) Dimensions(WDH): 13113971mm / 5.165.472.80in Net weight: 550g / 1.21lb Package weight: 800g / 1.76lb Packing List: 1L200 Tube Preamp 1DC 12V Power Adapter 1*User Manual.	B00AHRFBO6 Availability: Currently unavailable Score: 7.752 Category: Electronics Rating: 4 Votes: 6 Find similar products Aune 24bit/192K X1 DAC Headphone Amp & Preamp & USB DAC WM8805 PCM1793 USB Coxia. USB SOUND CARD Project computer receiver from PCM2707 of texas instruments, PCM1793 as sound decoder from i2s output, output from lineout or headphone. DAC project has coaxial digital input, receiving from the WM8805 Chip, which is much better than CS8414. CS8414supports 24bit/192K. Headphone amp project, headphoneamp part refer for the solo line. pre-amp project. This device can be used as a pure pre-amp, the op+buf design. High-grade component adopted，including ALPS audio attenuator, Nichicon capacitors KOA resistor, OMRON Relays. X DAC use a new component ,WM8805 chip , which has the 24BIT/192K DAC Function! The device uses the special audio power amplifier as a single switch to dual IC, the size is as the CD, easy to carry. You can add high capacity batteries for power. Drawing one the forum in the tube USB DAC and HA-2 design experience, using a cariety of advanced headphones actually adjust the sound to further enhance the sound quality.
B09137114Y Availability: Currently unavailable Score: 7.463 Category: Electronics Rating: 3.7 Votes: 3 Find similar products Burson Audio Playmate 2 Preamp/DAC/Headphone Amp. Measurement Package Content Input impedance: 38 KOhms Burson Playmate (P-171) IC Opamps for warranty diagnostic use. Frequency response: ± 1 dB 0 – 35Khz Remote Control (optional) hex key THD: <0.002% Power Supply 100-240V AC Output impedance (Head Amp): <2 Ohm Output impedance (Pre Out): 15 Ohm General Inputs: USB, Toslink Weight: app. 3Kg Outputs: RCA Pre-Amp / Headphone Jack Dimensions: 190mm x 150dimm x 60mm Impedance (Headphone Jack) Power Signal to Noise Ratio Separation 16 Ohm 3.5W 96db 99% 32 Ohm 2.5W 97db 99% 100 Ohm 600mW 98db 99% 150 Ohm 400mW 96db 99% 300 Ohm 150mW 95db 99.50% DAC Spec XMOS USB Spec Channel Separation: 128 dB @ 1KHz, 121 dB @ 20KHz Desktop OS: Win XP, 7, 8, 10 Mac OSX THD+N: 0.0018% @ 1KHz, 0dBFS Mobile OS: iOS* & Android (OTG support) PCM & DXD Support: PCM ≤ 768kHz up to 32bits Native DSD: Native DSD 64 / 128 / 256 / 512 DSD over PCM: DoP64 / DoP128 / DoP256 Asynchronous Isochronous.	B09F32BQPR Price: $219.99 Score: 7.194 Category: Electronics Rating: 4.1 Votes: 6 Find similar products FX Audio DAC-M1 Bluetooth DAC Amplifier,Audio Converte Video System with ESS9038Q2M XMOS XU208 Chips,BT,Coaxial,Optical Fiber,USB Input. Specification Chipset: ESS9038Q2M +XMOS XU208 +TPA6120A2+ CSR8675 Input options: USBA, OPT, COA, BT Output options: single-ended line, 6.35 headphone output THD+N: 0.00025% Signal to noise ratio: 118dB USB transmission method: asynchronous transmission USB compatibility: Win7, 8, 8.1, 10; Mac OSX 10.6 and above, Linux Sampling rate - USB PCM: 1bit, 16~32Bit/ 44.1~768KHz DSD: 2.8224~22.5792MHz OPT, COA PCM: 1Bit, 16~32Bit/ 44.1~192kHz DSD: DSD64 (DoP) BT PCM: 24Bit/ 44.1~96kHz Headphone output power: 500mW (3292), 340mW (6402), 180mW (1502), 96mW (300Q2) Power consumption: 3.5W Standby power consumption: 0.25W Product size: 13x10x5.5cm Product weight: 300 grams.
B08931PJD3 Availability: Currently unavailable Score: 7.042 Category: Electronics Rating: 4.3 Votes: 18 Find similar products Fanmusic Topping A90 Headphone Amplifier 4.4mm XLR Desktop HiFi Full Balanced Amplifier Pre-Amplifier Black. Full balanced + SE headphone output---A90 has three output headphone jacks of 4-pin-XLR，4.4 balanced and 6.35 SE to meet different usages. A90 is provided with a wide range of adaptation to headphones.---The SE 25Vpp / balanced 49Vpp high output voltage along with high output current & less than 0.1 Ohm output impedance, A90 is equipped with three gain settings of -9.5dB/ 0dB / 9.5dB for SE and -35dB / 6.0dB / 15.5dB for balanced. The noise of merely 0. 2uVrms makes A90 easily adapt to all types of headphones from extremely sensitive IEMs to most power demanding full sized over-ears. It's a great companion of active monitors stacked with D90 DAC when A90 work as pre-amp application. Contents list: A901 AC cable1 6.35mm to 3.5mm connector1 User manual1.	B0BDM6W7YN Price: $35 Score: 6.993 Category: Electronics Rating: 4 Votes: 32 Find similar products Linsoul 7HZ SEVENHERTZ 71 Portable Headphone Amplifier DAC Dongle with AK4377 Chip, High-End OCC Cable, Supports Android 5.1 and Above. Spec: Model Name: 7HZ SEVENHERTZ 71 DAC Chip: AK4377 THD+N: -108dB/0.0004%@32 ohms Output Power: 70 mW@32 ohms Output Voltage: 1 Virms@32 ohms Sensitivity: 106 dB Frequency Range: 20 Hz-40 kHz Noise: <0.9 μV PCM Decoding: 32bit/384KHz Maximum DSD: DSD64; DSD128 (DOP).
B07NVTB6M1 Availability: Currently unavailable Score: 6.944 Category: Electronics Rating: 4 Votes: 1 Find similar products Cocktail Audio HA500H Balanced Tube Headphone Amp/Preamp/Bluetooth MQA/DSD DAC (Silver). Model name HA500H Display 5.0 TFT LCD(800 x 480 pixels) Interface Key & Jog(Volume/Scroll), IR Remote Control Input Analog Unbalanced(RCA) Input impedance: 47K ohm, Default 2Vrms(controllable 1 ~ 4Vrms) Balanced(XLR) Input impedance: 47K ohm, Default 4Vrms(controllable 2 ~ 8Vrms) Digital COAXIAL x 1 Sample Rate: up to 192Khz Toslink x 1 Sample Rate: up to 192Khz AES/EBU x 1 Sample Rate: up to 192Khz I²S HDMI x 1 Native DSD256, DoP(Max DSD128), PCM up to 384Khz, MQA Bluetooth Input Bluetooth 4.2 Profile: AVRCP/A2DP, Format: SBC, aptX, AAC, MP3 USB DAC Audio USB B Type x 1 USB Audio Class 2.0, Support up to PCM 32Bit/384Khz, Native DSD256, MQA384Khz DAC Performance; Sabre³² ES9018K2M Dual DAC(One per each channel) Sabre³² ES9018K2M Dual DAC Balanced Line Out( XLR x 2 ) Dynamic Range: 130dB(Max 4Vrms/8Vrms, Stereo) THD+N:0.0004% Unbalanced Line Out(RCA x 2)) Dynamic Range: 130dB(Max 2Vrms/4Vrms, Stereo) THD+N:0.0004% Analog Out Spec (※ Not applicable to Tube) Balanced Line Out(XLR) Unbalanced Line Out(RCA) Rated Output Level(High/Low) High - 8Vrms / Low - 4Vrms High - 4Vrms / Low - 2Vrms Frequency Response 10Hz ~ 80KHz: +/- 0.1dB 10Hz ~ 80KHz: +/- 0.1dB 20Hz ~ 20KHz: +/- 0.01dB 20Hz ~ 20KHz: +/- 0.01dB THD+N @ 1KHz(20Hz ~ 20KHz) <-105dB (<0.00056%) <-105dB (<0.00056%) Channel Separation -110dB -110dB Signal-to-Noise Ratio <-113dB <-112dB Headphone Out Spec (※ Not applicable to Tube) Balanced Output Unbalanced Output Impedance to be selected High Low High Low Rated Output Power 600 ohm 485mW per CH 120mW per CH 125mW per CH 31mW per CH 16 ohm n/a n/a 1100mW per CH 450mW per CH Frequency Response 10Hz ~ 80KHz ±0.5dB.	B00IWK8FK2 Availability: Currently unavailable Score: 6.897 Category: Electronics Rating: 4 Votes: 9 Find similar products Aune T1 MK2 (Second Generation) 6922 24bit/96kHz Tube Amplifier Mini Hi-fi USB DAC Decoder Black. Specifications:Input Interface: USBMaximum word length:24BitMaximum sampling rate: 192KMaximum DSD rate (DOP) :DSD64Typical line output indicators: RCAOutput voltage level @0dB: 2VrmsFrequency response(from 20Hz to 20kHz) :+-0.5dBTHD+N@1KHz :0.2%NOISE: -105DBHeaphone output power :@300Ω 240mWPackage listings:T1se 1Power adapter 1Manual 1USB cable 16.5mm to 3.5mm stereo F adapter *1.
B08DXXWBH1 Price: $149 Score: 6.757 Category: Electronics Rating: 4.3 Votes: 68 Find similar products TOPPING L30II NFCA Linear Headphone Amp - 6.35mm Jack 3.5mm Adaptor RCA Input and Output 37Vpp high Output Voltage Mini HiFi Amp Audio Hi-Res Preamplifier (Blue). .	B09MF9YSK9 Price: $65.99 Score: 6.757 Category: Electronics Rating: 4.2 Votes: 31 Find similar products FX-Audio Tube-02 Pro Tube Headphone Amplifier, Vacuum 5725 Tube Preamp, Mini Hi-Fi Integrated Stereo Class A amp Supports 32-600 ohms of Headphones, for Stereo Amplifier/Active Speaker. .